CFKLR - NP-4835 SERIES TONER BLACK FOR CONAN COPIERS

  • MSDS: CFKLR
  • Manufacturer: CANON U S A INC
  • Product Name: NP-4835 SERIES TONER BLACK FOR CONAN COPIERS
  • National Stock Number: 6850-01-409-0947
Product Identification

Product ID:NP-4835 SERIES TONER BLACK FOR CONAN COPIERS
MSDS Date:12/01/1991
FSC:6850
NIIN:01-409-0947
MSDS Number: CFKLR

Responsible Party
CANON U.S.A., INC.
ONE CANON PLAZA
HEW HYDE PARK, NY 11040-1113
US

Emergency Phone: 516-488-6700/800-424-9300(CHEMTREC)

Info Phone: 516-488-6700

Cage: 08YZ7

Contractor
TONER ETC. INC. (603-431-3624)
UNKNOW NEW HYDE PARK, NY 11042 US

Telephone: 516-328-5000; 5600

Cage: NO805

Ingredients

STYRENE ACRYLATE COPOLYMER

Fraction By Weight: 50-60%


IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 35-45%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION- MINIMAL RESPIRATORY TRACT
IRRITATION MAY OCCUR AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY
NON-TOXIC DUST.

First Aid

First Aid:INHALATION- REMOVE FROM EXPOSURE TO FRESH AIR. EYES- OPEN
EYES AND FLUSH WITH PLENTY OF WATER. IF IRRITATION PERSISITS, GET
MEDICAL ATTENTION. SKIN- WASH WITH SOAP AND WATER. INGESTION-
DRINK SEVER AL GLASSES OF WATER. CALL A PHYSICIAN.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICALS.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:THIS MATERIAL, LIKE MOST ORGANIC MATERIAL
IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

Accidental Release

Spill Release Procedures:AVOID INHALATION OF DUST. SWEEP MATERIAL ONTO
PAPER AND PLACE IN FIBER CARTON.

Handling

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE

Exposure Controls

Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE
Eye Protection:NONE
Other Protective Equipment:NONE
Supplemental Safety and Health
NONE

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:100-150C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4-1.6
Evaporation Rate & Reference:NEGLIGIBLE (N-BUTYL ACET)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS FINE POWDER, WITH SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NEGL.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Hazardous Decomposition Products:AS WITH ANY ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND PROBABLY CARBON
MONOXIDE.

Disposal

Waste Disposal Methods:THIS MATERIAL MAY BE CONSIDERED PLASTIC WASTE.
ENSURE DISPOSAL IS IN COMPLIANCE WITH FEDERAL, STATE AND/OR LOCAL
REGULTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.